Обсуждение: AIX binaries

Are there any postgres AIX binaries?
installp would be nicer then rpm IMO

well.....<smiling>...i have some, yes.

Don't think they are quite "installp"-ready, however.

:-)


-----Original Message-----
From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Mag Gam
Sent: Wednesday, June 08, 2005 8:49 AM
To: pgsql-ports@postgresql.org
Subject: [PORTS] AIX binaries


Are there any postgres AIX binaries?
installp would be nicer then rpm IMO

---------------------------(end of broadcast)---------------------------
TIP 8: explain analyze is your friend

-----Original Message-----
From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of dev@volpe.it
Sent: Wednesday, June 08, 2005 3:21 PM
To: pgsql-ports@postgresql.org
Subject: Re: [PORTS] AIX binaries

Why not trying to organize it?!

We may arrange a "uniform" build (compile options, etc) to test on different HW environment and eventually release (by one of us) a "stable" lpp.

I can build on:

140 AIX 5.1

P630 AIX 5.2

P595 AIX 5.3

What about you guys?

BUT! If I'm not wrong we still have the 5.3 run problem... the one Andrew Hammond open an APAR with IBM (not yet an ID?)?

Ciao

Vince

On Jun 8, 2005, at 4:41 PM, Mohan, Ross wrote:

well.....<smiling>...i have some, yes.

Don't think they are quite "installp"-ready, however. 

:-)

-----Original Message-----

From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Mag Gam

Sent: Wednesday, June 08, 2005 8:49 AM

To: pgsql-ports@postgresql.org

Subject: [PORTS] AIX binaries

Are there any postgres AIX binaries? 

installp would be nicer then rpm IMO

---------------------------(end of broadcast)---------------------------

TIP 8: explain analyze is your friend

---------------------------(end of broadcast)---------------------------

TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org

-----Original Message-----
From: dev@volpe.it [mailto:dev@volpe.it]
Sent: Wednesday, June 08, 2005 3:57 PM
To: Mohan, Ross
Cc: pgsql-ports@postgresql.org
Subject: Re: [PORTS] AIX binaries

The "RUN" problem is:    

could not connect to database template1: FATAL:  unsupported frontend protocol 0.0: server supports 1.0 to 3.0

Means I built positively on 5.3 but NEVER run !

C&T (Ciao & Thanks, from now on)

Vince

On Jun 8, 2005, at 9:41 PM, Mohan, Ross wrote:

Vince,

 

I don't think it's stable enough, but as of now, that's a prejudice based

on my difficulty in getting the code to compile and run under anything but

the lowest level of optimization.

 

I wouldn't feel comfortable sharing binaries until I've tested it a bit more.

( For now, just initdb, createdb, test and start/shut has been done. )

 

My Machine?  7029  p570  power5   AIX5.3

 

Remind me of the "run" problem?

 

Next step: I am going to be running these non-optimized binaries

            in debug mode and try to flush out critters.

 

 

Thanks,

 

-Ross

-----Original Message-----
From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of dev@volpe.it
Sent: Wednesday, June 08, 2005 3:21 PM
To: pgsql-ports@postgresql.org
Subject: Re: [PORTS] AIX binaries

Why not trying to organize it?!

We may arrange a "uniform" build (compile options, etc) to test on different HW environment and eventually release (by one of us) a "stable" lpp.

I can build on:

140 AIX 5.1

P630 AIX 5.2

P595 AIX 5.3

What about you guys?

BUT! If I'm not wrong we still have the 5.3 run problem... the one Andrew Hammond open an APAR with IBM (not yet an ID?)?

Ciao

Vince

On Jun 8, 2005, at 4:41 PM, Mohan, Ross wrote:

well.....<smiling>...i have some, yes.

Don't think they are quite "installp"-ready, however. 

:-)

-----Original Message-----

From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Mag Gam

Sent: Wednesday, June 08, 2005 8:49 AM

To: pgsql-ports@postgresql.org

Subject: [PORTS] AIX binaries

Are there any postgres AIX binaries? 

installp would be nicer then rpm IMO

---------------------------(end of broadcast)---------------------------

TIP 8: explain analyze is your friend

---------------------------(end of broadcast)---------------------------

TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org

-----Original Message-----
From: dev@volpe.it [mailto:dev@volpe.it]
Sent: Wednesday, June 08, 2005 4:55 PM
To: Mohan, Ross
Cc: pgsql-ports@postgresql.org
Subject: Re: [PORTS] AIX binaries

./configure CC=/usr/vac/bin/cc --enable-aix64 --with-includes=/opt/freeware/include --with-libraries=/opt/freeware/lib --with-python --with-pam --enable-thread-safety

Optimizing flags do NOT works

No other flags set.

C&T

V

On Jun 8, 2005, at 10:04 PM, Mohan, Ross wrote:

right..i remember now...what were your

 

CFLAGS set to?

 

and which ./configure flags did you use?

 

 

 

I had to get pretty damn vanilla to get the code to like me.

 

 

Ciao e Grazie, per adesso,

 

Ross

-----Original Message-----
From: dev@volpe.it [mailto:dev@volpe.it]
Sent: Wednesday, June 08, 2005 3:57 PM
To: Mohan, Ross
Cc: pgsql-ports@postgresql.org
Subject: Re: [PORTS] AIX binaries

The "RUN" problem is:    

could not connect to database template1: FATAL:  unsupported frontend protocol 0.0: server supports 1.0 to 3.0

Means I built positively on 5.3 but NEVER run !

C&T (Ciao & Thanks, from now on)

Vince

On Jun 8, 2005, at 9:41 PM, Mohan, Ross wrote:

Vince,

 

I don't think it's stable enough, but as of now, that's a prejudice based

on my difficulty in getting the code to compile and run under anything but

the lowest level of optimization.

 

I wouldn't feel comfortable sharing binaries until I've tested it a bit more.

( For now, just initdb, createdb, test and start/shut has been done. )

 

My Machine?  7029  p570  power5   AIX5.3

 

Remind me of the "run" problem?

 

Next step: I am going to be running these non-optimized binaries

            in debug mode and try to flush out critters.

 

 

Thanks,

 

-Ross

-----Original Message-----
From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of dev@volpe.it
Sent: Wednesday, June 08, 2005 3:21 PM
To: pgsql-ports@postgresql.org
Subject: Re: [PORTS] AIX binaries

Why not trying to organize it?!

We may arrange a "uniform" build (compile options, etc) to test on different HW environment and eventually release (by one of us) a "stable" lpp.

I can build on:

140 AIX 5.1

P630 AIX 5.2

P595 AIX 5.3

What about you guys?

BUT! If I'm not wrong we still have the 5.3 run problem... the one Andrew Hammond open an APAR with IBM (not yet an ID?)?

Ciao

Vince

On Jun 8, 2005, at 4:41 PM, Mohan, Ross wrote:

well.....<smiling>...i have some, yes.

Don't think they are quite "installp"-ready, however. 

:-)

-----Original Message-----

From: pgsql-ports-owner@postgresql.org [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Mag Gam

Sent: Wednesday, June 08, 2005 8:49 AM

To: pgsql-ports@postgresql.org

Subject: [PORTS] AIX binaries

Are there any postgres AIX binaries? 

installp would be nicer then rpm IMO

---------------------------(end of broadcast)---------------------------

TIP 8: explain analyze is your friend

---------------------------(end of broadcast)---------------------------

TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org

Well, the main reason why I want pgsql binaries for AIX is, I really
want tsearch2 and a lot of those contrib modules...


On 6/8/05, Mohan, Ross <RMohan@arbinet.com> wrote:
>
> Thanks.
>
> Agreed. Optimizing crashes and burns...at every bundled/separate level i
> have tried.
> The code is brittle in this regard.
>
> Believe the "thread-safety" is superfluous:  this is not threaded software,
> IIRC.
>
>
>
>
> -----Original Message-----
> From: dev@volpe.it [mailto:dev@volpe.it]
> Sent: Wednesday, June 08, 2005 4:55 PM
> To: Mohan, Ross
> Cc: pgsql-ports@postgresql.org
> Subject: Re: [PORTS] AIX binaries
>
> ./configure CC=/usr/vac/bin/cc --enable-aix64
> --with-includes=/opt/freeware/include
> --with-libraries=/opt/freeware/lib --with-python --with-pam
> --enable-thread-safety
>
>
> Optimizing flags do NOT works
>
>
> No other flags set.
>
>
> C&T
> V
>
>
>
>
>
> On Jun 8, 2005, at 10:04 PM, Mohan, Ross wrote:
>
>
> right..i remember now...what were your
>
> CFLAGS set to?
>
> and which ./configure flags did you use?
>
>
>
> I had to get pretty damn vanilla to get the code to like me.
>
>
> Ciao e Grazie, per adesso,
>
> Ross
>
>
> -----Original Message-----
> From: dev@volpe.it [mailto:dev@volpe.it]
> Sent: Wednesday, June 08, 2005 3:57 PM
> To: Mohan, Ross
> Cc: pgsql-ports@postgresql.org
> Subject: Re: [PORTS] AIX binaries
>
> The "RUN" problem is:
>
>
> could not connect to database template1: FATAL:  unsupported frontend
> protocol 0.0: server supports 1.0 to 3.0
>
>
>
>
> Means I built positively on 5.3 but NEVER run !
>
>
> C&T (Ciao & Thanks, from now on)
>
>
> Vince
>
>
>
>
>
> On Jun 8, 2005, at 9:41 PM, Mohan, Ross wrote:
>
>
> Vince,
>
> I don't think it's stable enough, but as of now, that's a prejudice based
> on my difficulty in getting the code to compile and run under anything but
> the lowest level of optimization.
>
> I wouldn't feel comfortable sharing binaries until I've tested it a bit
> more.
> ( For now, just initdb, createdb, test and start/shut has been done. )
>
> My Machine?  7029  p570  power5   AIX5.3
>
> Remind me of the "run" problem?
>
> Next step: I am going to be running these non-optimized binaries
>             in debug mode and try to flush out critters.
>
>
> Thanks,
>
> -Ross
>
>
> -----Original Message-----
> From: pgsql-ports-owner@postgresql.org
> [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of
> dev@volpe.it
> Sent: Wednesday, June 08, 2005 3:21 PM
> To: pgsql-ports@postgresql.org
> Subject: Re: [PORTS] AIX binaries
>
> Why not trying to organize it?!
>
>
> We may arrange a "uniform" build (compile options, etc) to test on different
> HW environment and eventually release (by one of us) a "stable" lpp.
>
>
> I can build on:
>
>
> 140 AIX 5.1
> P630 AIX 5.2
> P595 AIX 5.3
>
>
> What about you guys?
>
>
> BUT! If I'm not wrong we still have the 5.3 run problem... the one Andrew
> Hammond open an APAR with IBM (not yet an ID?)?
>
>
> Ciao
>
>
> Vince
>
>
>
>
>
>
>
> On Jun 8, 2005, at 4:41 PM, Mohan, Ross wrote:
>
>
> well.....<smiling>...i have some, yes.
>
>
> Don't think they are quite "installp"-ready, however.
>
>
> :-)
>
>
>
>
> -----Original Message-----
> From: pgsql-ports-owner@postgresql.org
> [mailto:pgsql-ports-owner@postgresql.org] On Behalf Of Mag
> Gam
> Sent: Wednesday, June 08, 2005 8:49 AM
> To: pgsql-ports@postgresql.org
> Subject: [PORTS] AIX binaries
>
>
>
>
> Are there any postgres AIX binaries?
> installp would be nicer then rpm IMO
>
>
> ---------------------------(end of
> broadcast)---------------------------
> TIP 8: explain analyze is your friend
>
>
> ---------------------------(end of
> broadcast)---------------------------
> TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org
>
>
>
>
>
>
>
>