Обсуждение: Restartable Recovery
On Marko Kreen's detailed suggestion, I've implemented a restartable recovery mode for archive recovery (aka PITR). Restart points are known as recovery checkpoints and are normally taken every 100 checkpoints in the log to ensure good recovery performance. An additional mode standby_mode = 'true' can also be specified, which ensures that a recovery checkpoint occurs for each checkpoint in the logs. Some other code refactorings, though all changes isolated to xlog.c and to pg_control.h; code comments welcome. Applies cleanly to cvstip, passes make check. Further details testing is very desirable. I've tested restarting a recovery twice and things work successfully. -- Simon Riggs EnterpriseDB http://www.enterprisedb.com
Вложения
Simon Riggs <simon@2ndquadrant.com> writes: > [2. text/x-patch; restartableRecovery.patch] Hmm, wouldn't you have to reboot the resource managers at each checkpoint? I'm afraid otherwise things like postponed page splits could get lost on restart from a later checkpoint. regards, andreas
Andreas Seltenreich <andreas+pg@gate450.dyndns.org> writes: > Simon Riggs <simon@2ndquadrant.com> writes: >> [2. text/x-patch; restartableRecovery.patch] > Hmm, wouldn't you have to reboot the resource managers at each > checkpoint? I'm afraid otherwise things like postponed page splits > could get lost on restart from a later checkpoint. Ouch. That's a bit nasty. You can't just apply a postponed split at checkpoint time, because the WAL record could easily be somewhere after the checkpoint, leading to duplicate insertions. Right offhand I don't see how to make this work :-( regards, tom lane
On Sun, 2006-07-16 at 10:51 -0400, Tom Lane wrote: > Andreas Seltenreich <andreas+pg@gate450.dyndns.org> writes: > > Simon Riggs <simon@2ndquadrant.com> writes: > >> [2. text/x-patch; restartableRecovery.patch] > > > Hmm, wouldn't you have to reboot the resource managers at each > > checkpoint? I'm afraid otherwise things like postponed page splits > > could get lost on restart from a later checkpoint. > > Ouch. That's a bit nasty. You can't just apply a postponed split at > checkpoint time, because the WAL record could easily be somewhere after > the checkpoint, leading to duplicate insertions. Right offhand I don't > see how to make this work :-( Yes, ouch. So much for gung-ho code sprints; thanks Andreas. To do this we would need to have another rmgr specific routine that gets called at a recovery checkpoint. This would then write to disk the current state of the incomplete multi-WAL actions, in some manner. During the startup routines we would check for any pre-existing state files and use those to initialise the incomplete action cache. Cleanup would then discard all state files. That allows us to not-forget actions, but it doesn't help us if there are problems repeating actions twice. We would at least know that we are in a potential double-action zone and could give different kinds of errors or handling. Or we can simply mark any indexes incomplete-needs-rebuild if they had a page split during the overlap time between the last known good recovery checkpoint and the following one. But that does lead to randomly bounded recovery time, which might be better to have started from scratch anyway. Given time available for 8.2, neither one is a quick fix. -- Simon Riggs EnterpriseDB http://www.enterprisedb.com
On Sun, 2006-07-16 at 20:56 +0100, Simon Riggs wrote: > On Sun, 2006-07-16 at 15:33 -0400, Tom Lane wrote: > > Simon Riggs <simon@2ndquadrant.com> writes: > > > On Sun, 2006-07-16 at 12:40 -0400, Tom Lane wrote: > > >> A compromise that might be good enough is to add an rmgr routine defined > > >> as "bool is_idle(void)" that tests whether the rmgr has any open state > > >> to worry about. Then, recovery checkpoints are done only if all rmgrs > > >> say they are idle. > > > > > Perhaps that should be extended to say whether there are any > > > non-idempotent changes made in the last checkpoint period. That might > > > cover a wider set of potential actions. > > > > Perhaps best to call it safe_to_checkpoint(), and not pre-judge what > > reasons the rmgr might have for not wanting to restart here. > > You read my mind. > > > If we are only going to do a recovery checkpoint at every Nth checkpoint > > record, then occasionally having to skip one seems no big problem --- > > just do it at the first subsequent record that is safe. > > Got it. I've implemented this for BTree, GIN, GIST using an additional rmgr function bool rm_safe_restartpoint(void) The functions are actually trivial, assuming I've understood this and how GIST and GIN work for their xlogging. "Recovery checkpoints" are now renamed "restartpoints" to avoid confusion with checkpoints. So checkpoints occur during normal processing (only) and restartpoints occur during recovery (only). Updated patch enclosed, which I believe has no conflicts with the other patches on xlog.c just submitted. Much additional testing required, but the underlying concepts are very simple really. Andreas: any further gotchas? :-) -- Simon Riggs EnterpriseDB http://www.enterprisedb.com
Вложения
Nice. I was going to ask if this could make it into 8.2. --------------------------------------------------------------------------- Simon Riggs wrote: > On Sun, 2006-07-16 at 20:56 +0100, Simon Riggs wrote: > > On Sun, 2006-07-16 at 15:33 -0400, Tom Lane wrote: > > > Simon Riggs <simon@2ndquadrant.com> writes: > > > > On Sun, 2006-07-16 at 12:40 -0400, Tom Lane wrote: > > > >> A compromise that might be good enough is to add an rmgr routine defined > > > >> as "bool is_idle(void)" that tests whether the rmgr has any open state > > > >> to worry about. Then, recovery checkpoints are done only if all rmgrs > > > >> say they are idle. > > > > > > > Perhaps that should be extended to say whether there are any > > > > non-idempotent changes made in the last checkpoint period. That might > > > > cover a wider set of potential actions. > > > > > > Perhaps best to call it safe_to_checkpoint(), and not pre-judge what > > > reasons the rmgr might have for not wanting to restart here. > > > > You read my mind. > > > > > If we are only going to do a recovery checkpoint at every Nth checkpoint > > > record, then occasionally having to skip one seems no big problem --- > > > just do it at the first subsequent record that is safe. > > > > Got it. > > I've implemented this for BTree, GIN, GIST using an additional rmgr > function bool rm_safe_restartpoint(void) > > The functions are actually trivial, assuming I've understood this and > how GIST and GIN work for their xlogging. > > "Recovery checkpoints" are now renamed "restartpoints" to avoid > confusion with checkpoints. So checkpoints occur during normal > processing (only) and restartpoints occur during recovery (only). > > Updated patch enclosed, which I believe has no conflicts with the other > patches on xlog.c just submitted. > > Much additional testing required, but the underlying concepts are very > simple really. Andreas: any further gotchas? :-) > > -- > Simon Riggs > EnterpriseDB http://www.enterprisedb.com [ Attachment, skipping... ] > > ---------------------------(end of broadcast)--------------------------- > TIP 4: Have you searched our list archives? > > http://archives.postgresql.org -- Bruce Momjian bruce@momjian.us EnterpriseDB http://www.enterprisedb.com + If your life is a hard drive, Christ can be your backup. +
Simon Riggs <simon@2ndquadrant.com> writes: > I've implemented this for BTree, GIN, GIST using an additional rmgr > function bool rm_safe_restartpoint(void) > ... > "Recovery checkpoints" are now renamed "restartpoints" to avoid > confusion with checkpoints. So checkpoints occur during normal > processing (only) and restartpoints occur during recovery (only). Applied with revisions. As submitted the patch pushed backup_label out of the way immediately upon reading it, which is no good: you need to be sure that the starting checkpoint location is written to pg_control first, else an immediate crash would allow the thing to try to start from whatever checkpoint is listed in the backed-up pg_control. Also, the minimum recovery stopping point that's obtained using the label file still has to be enforced if there's a crash during the replay sequence. I felt the best way to do that was to copy the minimum stopping point into pg_control, so that's what the code does now. Also, as I mentioned earlier, I think that doing restartpoints on the basis of elapsed time is simpler and more useful than having an explicit distinction between "normal" and "standby" modes. We can always invent a standby_mode flag later if we need one, but we don't need it for this. regards, tom lane
On Mon, 2006-08-07 at 13:05 -0400, Tom Lane wrote: > Simon Riggs <simon@2ndquadrant.com> writes: > > I've implemented this for BTree, GIN, GIST using an additional rmgr > > function bool rm_safe_restartpoint(void) > > ... > > "Recovery checkpoints" are now renamed "restartpoints" to avoid > > confusion with checkpoints. So checkpoints occur during normal > > processing (only) and restartpoints occur during recovery (only). > > Applied with revisions. err....CheckPointGuts() :-) I guess patch reviews need some spicing up. > As submitted the patch pushed backup_label out > of the way immediately upon reading it, which is no good: you need to be > sure that the starting checkpoint location is written to pg_control > first, else an immediate crash would allow the thing to try to start > from whatever checkpoint is listed in the backed-up pg_control. Also, > the minimum recovery stopping point that's obtained using the label file > still has to be enforced if there's a crash during the replay sequence. > I felt the best way to do that was to copy the minimum stopping point > into pg_control, so that's what the code does now. Thanks for checking that. > Also, as I mentioned earlier, I think that doing restartpoints on the > basis of elapsed time is simpler and more useful than having an explicit > distinction between "normal" and "standby" modes. We can always invent > a standby_mode flag later if we need one, but we don't need it for this. OK, agreed. The original thinking was that writing a restartpoint was more crucial when in standby mode; but this way we've better performance and have a low ceiling on the restart time if that should ever occur at the worst moment. Thanks again to Marko for the concept. I'll work on the docs for backup.sgml also. -- Simon Riggs EnterpriseDB http://www.enterprisedb.com