Обсуждение: v6.4-BETA3 problems with FreeBSD

Поиск
Список
Период
Сортировка

v6.4-BETA3 problems with FreeBSD

От
SHIOZAKI Takehiko
Дата:
Hello!

I tried postgresql.v6.4-BETA3 and found some problems especially
with FreeBSD.
The following is my environment:FreeBSD 2.2.7-RELEASEGNU Make version 3.76.1, by Richard Stallman and Roland
McGrath.gccversion 2.7.2.1GNU Bison version 1.25flex version 2.5.4
 

* makefiles/Makefile.freebsdIt should have "-Bforcearchive" option just like asmakefiles/Makefile.bsd (and it used to
be).Withoutit, I got such errors in test/regress/results/misc.out.
 

========================================================================
ERROR:  Can't find function reverse_name in file
/usr/local/src/postgresql.v6.4-BETA3/pgsql/src/test/regress/input/../regress.so
========================================================================
# And the original Makefile.freebsd does not seem to work# as you intended.  As `\' overrides `#', the last 2 lines#
arecommented out together.
 


* Makefile.shlibFreeBSD is not supported.So no shared library for plpgsql is installed and regressiontest for it
fails.

========================================================================
gmake -C src install
gmake[3]: Entering directory `/usr/local/src/postgresql.v6.4-BETA3/pgsql/src/pl/
plpgsql/src'
/usr/bin/install -c -m 644  /usr/local/pgsql/lib/plpgsql.so
usage: install [-CcDps] [-f flags] [-g group] [-m mode] [-o owner] file1 file2      install [-CcDps] [-f flags] [-g
group][-m mode] [-o owner] file1 ...            fileN directory      install -d [-g group] [-m mode] [-o owner]
directory...
 
gmake[3]: *** [install] Error 64
========================================================================
And no shared libraries for libecpg, libpq++ and libpq.aare made and installed.


* pg_dumpallPg_dumpall command outputs "create database" statement such as:
========================================================================
create database with encoding='EUC_JP' DBNAME;
========================================================================But it should be:
========================================================================
create database DBNAME with encoding='EUC_JP';
========================================================================


Regards

-- 
ASCII CORPORATION
Technical Center
SHIOZAKI Takehiko
<takehi-s@ascii.co.jp>

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
The Hermit Hacker
Дата:
On Fri, 30 Oct 1998, SHIOZAKI Takehiko wrote:

> Hello!
> 
> I tried postgresql.v6.4-BETA3 and found some problems especially
> with FreeBSD.
> The following is my environment:
>     FreeBSD 2.2.7-RELEASE
>     GNU Make version 3.76.1, by Richard Stallman and Roland McGrath.
>     gcc version 2.7.2.1
>     GNU Bison version 1.25
>     flex version 2.5.4
> 
> * makefiles/Makefile.freebsd
>     It should have "-Bforcearchive" option just like as
>     makefiles/Makefile.bsd (and it used to be).
>     Without it, I got such errors in test/regress/results/misc.out.
Under ELF, this does not work, so adding it back in "as is" isn't
an option.  Let me see if I can come up with something here that works...

Marc G. Fournier                                
Systems Administrator @ hub.org 
primary: scrappy@hub.org           secondary: scrappy@{freebsd|postgresql}.org

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
Tatsuo Ishii
Дата:
>> I tried postgresql.v6.4-BETA3 and found some problems especially
>> with FreeBSD.
>> The following is my environment:
>>     FreeBSD 2.2.7-RELEASE
>>     GNU Make version 3.76.1, by Richard Stallman and Roland McGrath.
>>     gcc version 2.7.2.1
>>     GNU Bison version 1.25
>>     flex version 2.5.4
>> 
>> * makefiles/Makefile.freebsd
>>     It should have "-Bforcearchive" option just like as
>>     makefiles/Makefile.bsd (and it used to be).
>>     Without it, I got such errors in test/regress/results/misc.out.
>
>    Under ELF, this does not work, so adding it back in "as is" isn't
>an option.  Let me see if I can come up with something here that works...

Maybe we should have separate makefile/Makefiles.whatever for FreeBSD
3.x and 2.2.x ?
--
Tatsuo Ishii
t-ishii@sra.co.jp

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
The Hermit Hacker
Дата:
On Fri, 30 Oct 1998, Tatsuo Ishii wrote:

> >> I tried postgresql.v6.4-BETA3 and found some problems especially
> >> with FreeBSD.
> >> The following is my environment:
> >>     FreeBSD 2.2.7-RELEASE
> >>     GNU Make version 3.76.1, by Richard Stallman and Roland McGrath.
> >>     gcc version 2.7.2.1
> >>     GNU Bison version 1.25
> >>     flex version 2.5.4
> >> 
> >> * makefiles/Makefile.freebsd
> >>     It should have "-Bforcearchive" option just like as
> >>     makefiles/Makefile.bsd (and it used to be).
> >>     Without it, I got such errors in test/regress/results/misc.out.
> >
> >    Under ELF, this does not work, so adding it back in "as is" isn't
> >an option.  Let me see if I can come up with something here that works...
> 
> Maybe we should have separate makefile/Makefiles.whatever for FreeBSD
> 3.x and 2.2.x ?
Ewww...
Waht does tools/ccsym show for you?  I'm guessing, but you don't
have a __ELF__ defined, correct?

Marc G. Fournier                                
Systems Administrator @ hub.org 
primary: scrappy@hub.org           secondary: scrappy@{freebsd|postgresql}.org

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
Tatsuo Ishii
Дата:
>> Maybe we should have separate makefile/Makefiles.whatever for FreeBSD
>> 3.x and 2.2.x ?
>
>    Ewww...
>
>    Waht does tools/ccsym show for you?  I'm guessing, but you don't
>have a __ELF__ defined, correct?

Right.
--
Tatsuo Ishii
t-ishii@sra.co.jp

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
The Hermit Hacker
Дата:
On Fri, 30 Oct 1998, Tatsuo Ishii wrote:

> >> Maybe we should have separate makefile/Makefiles.whatever for FreeBSD
> >> 3.x and 2.2.x ?
> >
> >    Ewww...
> >
> >    Waht does tools/ccsym show for you?  I'm guessing, but you don't
> >have a __ELF__ defined, correct?
> 
> Right.
And you don't have a /usr/include/elf.h, correct?  almost fixed,
just want to confirm my assumptions are correct, that is all :)

Marc G. Fournier                                
Systems Administrator @ hub.org 
primary: scrappy@hub.org           secondary: scrappy@{freebsd|postgresql}.org

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
Tatsuo Ishii
Дата:
>    And you don't have a /usr/include/elf.h, correct?  almost fixed,
>just want to confirm my assumptions are correct, that is all :)

We have /usr/include/elf.h (FreeBSD 2.2.6-RELEASE). What about yours,
Takehiko?
--
Tatsuo Ishii
t-ishii@sra.co.jp

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
The Hermit Hacker
Дата:
On Fri, 30 Oct 1998, Tatsuo Ishii wrote:

> >    And you don't have a /usr/include/elf.h, correct?  almost fixed,
> >just want to confirm my assumptions are correct, that is all :)
> 
> We have /usr/include/elf.h (FreeBSD 2.2.6-RELEASE). What about yours,
Oh, shit, there goes that idea :(  Hrmmm...back to the drawing
board :)

Marc G. Fournier                                
Systems Administrator @ hub.org 
primary: scrappy@hub.org           secondary: scrappy@{freebsd|postgresql}.org

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
SHIOZAKI Takehiko
Дата:
[On Oct 30, Tatsuo Ishii <t-ishii@sra.co.jp> writes:]
>
>We have /usr/include/elf.h (FreeBSD 2.2.6-RELEASE). What about yours,
>Takehiko?

I also have /usr/include/elf.h in FreeBSD 2.2.7-RELEASE with RCS header:$Id: elf.h,v 1.1.2.1 1998/01/27 16:23:39 jdp
Exp$
 
And I don't have it in FreeBSD 2.2.5-RELEASE.

-- 
$B$?$@$7!";d$O<*I!0v9"$,<e$$$N$G!"2q5D$O6X1l$K$7$F$/$@$5$$!#(B
--
$B1v:j(B $B5#I'(B(SHIOZAKI Takehiko)    <takehi-s@ascii.co.jp>
Technical Center,    ASCII CORPORATION

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
Tom Lane
Дата:
SHIOZAKI Takehiko <takehi-s@ascii.co.jp> writes:
> * Makefile.shlib
>     FreeBSD is not supported.

Can you provide an appropriate entry to add to Makefile.shlib for
FreeBSD?  It's probably much like one of the existing entries...

> gmake[3]: Entering directory `/usr/local/src/postgresql.v6.4-BETA3/pgsql/src/pl/
> plpgsql/src'
> /usr/bin/install -c -m 644  /usr/local/pgsql/lib/plpgsql.so
> usage: install [-CcDps] [-f flags] [-g group] [-m mode] [-o owner] file1 file2
>        install [-CcDps] [-f flags] [-g group] [-m mode] [-o owner] file1 ...
>              fileN directory
>        install -d [-g group] [-m mode] [-o owner] directory ...
> gmake[3]: *** [install] Error 64

Oops.  The plpgsql Makefile should exit a little more gracefully on
a system not supported by Makefile.shlib.  I'll do something about
that tomorrow.
        regards, tom lane

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
Tom Lane
Дата:
The Hermit Hacker <scrappy@hub.org> writes:
> On Fri, 30 Oct 1998, SHIOZAKI Takehiko wrote:
>> * makefiles/Makefile.freebsd
>> It should have "-Bforcearchive" option just like as
>> makefiles/Makefile.bsd (and it used to be).

>     Under ELF, this does not work, so adding it back in "as is" isn't
> an option.  Let me see if I can come up with something here that works...

Can we teach configure how to tell the difference between
ELF and pre-ELF BSD?
        regards, tom lane

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
The Hermit Hacker
Дата:
On Thu, 29 Oct 1998, Tom Lane wrote:

> The Hermit Hacker <scrappy@hub.org> writes:
> > On Fri, 30 Oct 1998, SHIOZAKI Takehiko wrote:
> >> * makefiles/Makefile.freebsd
> >> It should have "-Bforcearchive" option just like as
> >> makefiles/Makefile.bsd (and it used to be).
> 
> >     Under ELF, this does not work, so adding it back in "as is" isn't
> > an option.  Let me see if I can come up with something here that works...
> 
> Can we teach configure how to tell the difference between
> ELF and pre-ELF BSD?
Working on it now...:)
Its not a "nice fix", but it will get us through the release.

Marc G. Fournier                                
Systems Administrator @ hub.org 
primary: scrappy@hub.org           secondary: scrappy@{freebsd|postgresql}.org

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
Bruce Momjian
Дата:
> > * makefiles/Makefile.freebsd
> >     It should have "-Bforcearchive" option just like as
> >     makefiles/Makefile.bsd (and it used to be).
> >     Without it, I got such errors in test/regress/results/misc.out.
> 
>     Under ELF, this does not work, so adding it back in "as is" isn't
> an option.  Let me see if I can come up with something here that works...

Take a look at bsd 4.0.  I had to do the same thing.  I defined a new
template file, and changed the DLSUFFIX, and checked that in
Makefile.shlib.


--  Bruce Momjian                        |  http://www.op.net/~candle maillist@candle.pha.pa.us            |  (610)
853-3000+  If your life is a hard drive,     |  830 Blythe Avenue +  Christ can be your backup.        |  Drexel Hill,
Pennsylvania19026

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
SHIOZAKI Takehiko
Дата:
[On Oct 29, Tom Lane <tgl@sss.pgh.pa.us> writes:]
>
>Can you provide an appropriate entry to add to Makefile.shlib for
>FreeBSD?  It's probably much like one of the existing entries...

O.K.
I tried snapshot(Oct30) and made some patches.
# I think that it is confused to manage both Makefile.shlib and
# makefiles/Makefile.*, don't you?

* configureNow FreeBSD 2.X is not supported..., so I added its entry.If ELF_SYSTEM is set, gmake treat it defined even
thoughitis "false".  So nothing should be set to use "ifdef".BSD_SHLIB etc. may have same problems.
 

* Makefile.shlibAs you said, FreeBSD entry is much like BSD's.I only added ELF_SYSTEM code.

* makefiles/Makefile.freebsdIfdef/else/endif can not be indented with TABs.

========================================================================
*** configure.in.orig    Fri Oct 30 17:00:20 1998
--- configure.in    Sat Oct 31 10:07:38 1998
***************
*** 17,23 ****    linux*) os=linux need_tas=no ;;     bsdi*) os=bsdi need_tas=no ;;  freebsd3*) os=freebsd need_tas=no
elf=yes;;
 
!  freebsd1*) os=freebsd need_tas=no ;;   netbsd*|openbsd*) os=bsd need_tas=no ;;     dgux*) os=dgux need_tas=no ;;
aix*) os=aix need_tas=no ;;
 
--- 17,23 ----    linux*) os=linux need_tas=no ;;     bsdi*) os=bsdi need_tas=no ;;  freebsd3*) os=freebsd need_tas=no
elf=yes;;
 
!  freebsd[12]*) os=freebsd need_tas=no ;;   netbsd*|openbsd*) os=bsd need_tas=no ;;     dgux*) os=dgux need_tas=no ;;
   aix*) os=aix need_tas=no ;;
 
***************
*** 52,58 **** then     ELF_SYS=true else
!     ELF_SYS=false fi  if test "X$need_tas" = "Xyes"
--- 52,58 ---- then     ELF_SYS=true else
!     ELF_SYS= fi  if test "X$need_tas" = "Xyes"
*** configure.orig    Fri Oct 30 17:00:20 1998
--- configure    Sat Oct 31 10:07:00 1998
***************
*** 617,623 ****    linux*) os=linux need_tas=no ;;     bsdi*) os=bsdi need_tas=no ;;  freebsd3*) os=freebsd
need_tas=noelf=yes ;;
 
!  freebsd1*) os=freebsd need_tas=no ;;   netbsd*|openbsd*) os=bsd need_tas=no ;;     dgux*) os=dgux need_tas=no ;;
aix*) os=aix need_tas=no ;;
 
--- 617,623 ----    linux*) os=linux need_tas=no ;;     bsdi*) os=bsdi need_tas=no ;;  freebsd3*) os=freebsd
need_tas=noelf=yes ;;
 
!  freebsd[12]*) os=freebsd need_tas=no ;;   netbsd*|openbsd*) os=bsd need_tas=no ;;     dgux*) os=dgux need_tas=no ;;
   aix*) os=aix need_tas=no ;;
 
***************
*** 652,658 **** then     ELF_SYS=true else
!     ELF_SYS=false fi  if test "X$need_tas" = "Xyes"
--- 652,658 ---- then     ELF_SYS=true else
!     ELF_SYS= fi  if test "X$need_tas" = "Xyes"
*** Makefile.shlib.orig    Sat Oct 31 10:12:32 1998
--- Makefile.shlib    Sat Oct 31 10:14:47 1998
***************
*** 56,61 ****
--- 56,74 ---- # Makefile.global (or really Makefile.port) to supply DLSUFFIX and other # symbols. 
+ ifeq ($(PORTNAME), freebsd)
+   ifdef BSD_SHLIB
+     install-shlib-dep    := install-shlib
+     shlib                := lib$(NAME)$(DLSUFFIX).$(SO_MAJOR_VERSION).$(SO_MINOR_VERSION)
+     ifdef ELF_SYSTEM
+       LDFLAGS_SL            := -x -Bshareable
+     else
+       LDFLAGS_SL            := -x -Bshareable -Bforcearchive
+     endif
+     CFLAGS                += $(CFLAGS_SL)
+   endif
+ endif
+  ifeq ($(PORTNAME), bsd)   ifdef BSD_SHLIB     install-shlib-dep    := install-shlib
*** makefiles/Makefile.freebsd.orig    Sat Oct 31 09:13:20 1998
--- makefiles/Makefile.freebsd    Sat Oct 31 09:13:45 1998
***************
*** 5,13 ****     @${AR} cq $@.pic `lorder $<.obj | tsort`     ${RANLIB} $@.pic     @rm -f $@
!     ifdef ELF_SYSTEM
!         $(LD) -x -Bshareable -o $@ $@.pic
!     else
!             $(LD) -x -Bshareable -Bforcearchive -o $@ $@.pic
!     endif 
--- 5,13 ----     @${AR} cq $@.pic `lorder $<.obj | tsort`     ${RANLIB} $@.pic     @rm -f $@
! ifdef ELF_SYSTEM
!     $(LD) -x -Bshareable -o $@ $@.pic
! else
!     $(LD) -x -Bshareable -Bforcearchive -o $@ $@.pic
! endif 
========================================================================

-- 
ASCII CORPORATION
Technical Center
SHIOZAKI Takehiko
<takehi-s@ascii.co.jp>

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
The Hermit Hacker
Дата:
On Sat, 31 Oct 1998, SHIOZAKI Takehiko wrote:

> [On Oct 29, Tom Lane <tgl@sss.pgh.pa.us> writes:]
> >
> >Can you provide an appropriate entry to add to Makefile.shlib for
> >FreeBSD?  It's probably much like one of the existing entries...
> 
> O.K.
> I tried snapshot(Oct30) and made some patches.
> # I think that it is confused to manage both Makefile.shlib and
> # makefiles/Makefile.*, don't you?
Something ot look at for v6.5 .. right now, it works as is :)

> * configure
>     Now FreeBSD 2.X is not supported..., so I added its entry.
>     If ELF_SYSTEM is set, gmake treat it defined even though
>     it is "false".  So nothing should be set to use "ifdef".
>     BSD_SHLIB etc. may have same problems.
My oops, actually...I meant to put 'freebsd2*', not 'freebsd1*' :)
I put in yours though, anyway...


Marc G. Fournier                                
Systems Administrator @ hub.org 
primary: scrappy@hub.org           secondary: scrappy@{freebsd|postgresql}.org

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
SHIOZAKI Takehiko
Дата:
[On Oct 31, The Hermit Hacker <scrappy@hub.org> writes:]
>
>    My oops, actually...I meant to put 'freebsd2*', not 'freebsd1*' :)
>I put in yours though, anyway...

BETA5 stll needs the following small patch for FreeBSD 2.X.
# And my patch for nbtsearch.c is not applied yet.  Was it wrong?

========================================================================
*** configure.orig    Fri Oct 30 17:00:20 1998
--- configure    Sat Oct 31 10:07:00 1998
***************
*** 617,623 ****    linux*) os=linux need_tas=no ;;     bsdi*) os=bsdi need_tas=no ;;  freebsd3*) os=freebsd
need_tas=noelf=yes ;;
 
!  freebsd12*) os=freebsd need_tas=no ;;   netbsd*|openbsd*) os=bsd need_tas=no ;;     dgux*) os=dgux need_tas=no ;;
 aix*) os=aix need_tas=no ;;
 
--- 617,623 ----    linux*) os=linux need_tas=no ;;     bsdi*) os=bsdi need_tas=no ;;  freebsd3*) os=freebsd
need_tas=noelf=yes ;;
 
!  freebsd[12]*) os=freebsd need_tas=no ;;   netbsd*|openbsd*) os=bsd need_tas=no ;;     dgux*) os=dgux need_tas=no ;;
   aix*) os=aix need_tas=no ;;
 
*** makefiles/Makefile.freebsd.orig    Mon Nov  2 11:38:01 1998
--- makefiles/Makefile.freebsd    Mon Nov  2 11:38:08 1998
***************
*** 8,13 **** ifdef ELF_SYSTEM     $(LD) -x -Bshareable -o $@ $@.pic else
!         $(LD) -x -Bshareable -Bforcearchive -o $@ $@.pic endif 
--- 8,13 ---- ifdef ELF_SYSTEM     $(LD) -x -Bshareable -o $@ $@.pic else
!     $(LD) -x -Bshareable -Bforcearchive -o $@ $@.pic endif 
========================================================================

-- 
ASCII CORPORATION
Technical Center
SHIOZAKI Takehiko
<takehi-s@ascii.co.jp>

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
The Hermit Hacker
Дата:
On Mon, 2 Nov 1998, SHIOZAKI Takehiko wrote:

> [On Oct 31, The Hermit Hacker <scrappy@hub.org> writes:]
> >
> >    My oops, actually...I meant to put 'freebsd2*', not 'freebsd1*' :)
> >I put in yours though, anyway...
> 
> BETA5 stll needs the following small patch for FreeBSD 2.X.

Modifying configure directly isn't accetable, as it will change again once
autoconf is run.  Should have been written as:
freebsd1*|freebsd2*) ... :(

Second patch applied...

> # And my patch for nbtsearch.c is not applied yet.  Was it wrong?
Did I miss something?

Marc G. Fournier                                
Systems Administrator @ hub.org 
primary: scrappy@hub.org           secondary: scrappy@{freebsd|postgresql}.org

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
SHIOZAKI Takehiko
Дата:
[On Nov  2, The Hermit Hacker <scrappy@hub.org> writes:]
>
>> # And my patch for nbtsearch.c is not applied yet.  Was it wrong?
>
>    Did I miss something?

Please make sure whether this is correct.
http://www.PostgreSQL.ORG/mhonarc/pgsql-hackers/1998-10/msg01135.html

-- 
ASCII CORPORATION
Technical Center
SHIOZAKI Takehiko
<takehi-s@ascii.co.jp>

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
The Hermit Hacker
Дата:
On Mon, 2 Nov 1998, SHIOZAKI Takehiko wrote:

> [On Nov  2, The Hermit Hacker <scrappy@hub.org> writes:]
> >
> >> # And my patch for nbtsearch.c is not applied yet.  Was it wrong?
> >
> >    Did I miss something?
> 
> Please make sure whether this is correct.
> http://www.PostgreSQL.ORG/mhonarc/pgsql-hackers/1998-10/msg01135.html
Bruce, can you check that one.  Basically, we try and pass:
rel->rd_rel->relname
instead of
rel->rd_rel->relname.data
around line 217 (elog(...)) in nbtsearch.c ...

Marc G. Fournier                                
Systems Administrator @ hub.org 
primary: scrappy@hub.org           secondary: scrappy@{freebsd|postgresql}.org

Re: [HACKERS] v6.4-BETA3 problems with FreeBSD

От
Bruce Momjian
Дата:
> On Mon, 2 Nov 1998, SHIOZAKI Takehiko wrote:
> 
> > [On Nov  2, The Hermit Hacker <scrappy@hub.org> writes:]
> > >
> > >> # And my patch for nbtsearch.c is not applied yet.  Was it wrong?
> > >
> > >    Did I miss something?
> > 
> > Please make sure whether this is correct.
> > http://www.PostgreSQL.ORG/mhonarc/pgsql-hackers/1998-10/msg01135.html
> 
>     Bruce, can you check that one.  Basically, we try and pass:
> 
>     rel->rd_rel->relname
> 
>     instead of
> 
>     rel->rd_rel->relname.data
> 
>     around line 217 (elog(...)) in nbtsearch.c ...

Oh, I see the problem now.  Originally, I thought it was just a question
of style, but now I see that the whole structure is being passed to
elog(), rather than the character pointer.

Patch applied.

--  Bruce Momjian                        |  http://www.op.net/~candle maillist@candle.pha.pa.us            |  (610)
853-3000+  If your life is a hard drive,     |  830 Blythe Avenue +  Christ can be your backup.        |  Drexel Hill,
Pennsylvania19026

Чтобы сделать работу с сайтом удобнее, мы используем cookie и аналитический сервис «Яндекс.Метрика». Продолжая пользоваться сайтом, вы соглашаетесь с их использованием.