Обсуждение: pl/pgsql problem with search_path
My plpgsql function seems to be ignoring search_path when looking for
the right table to select from. I'm running 7.3.4. Below is my test
code. Am I doing something wrong?
TIA, Gene Chow
test=> create or replace function getval() returns varchar as '
test'> declare val varchar;
test'> begin
test'> select into val value from bar limit 1;
test'> return val;
test'> end;' language 'plpgsql';
CREATE FUNCTION
test=> create table public.bar ( value varchar );
CREATE TABLE
test=> insert into public.bar values ('public value');
INSERT 4012748 1
test=> create schema foo;
CREATE SCHEMA
test=> create table foo.bar ( value varchar );
CREATE TABLE
test=> insert into foo.bar values ('foo value');
INSERT 4012754 1
test=> set search_path to foo, public;
SET
test=> select *, getval() from bar;
value | getval
-----------+-----------
foo value | foo value
(1 row)
test=> set search_path to public;
SET
test=> select *, getval() from bar;
value | getval
--------------+-----------
public value | foo value
(1 row)
I think the problem is that the first time the function is called, it is
compiled and cached for later use. At that time the function is bound
to the table oid, so even though you change the search path, the cached
copy still calls the old table.
If you exit psql and re-enter, or change the schema _before_ you call
the function for the first time, it should be fine.
This highlights another problem with our plpgsql function caching.
---------------------------------------------------------------------------
Eugene Chow wrote:
> My plpgsql function seems to be ignoring search_path when looking for
> the right table to select from. I'm running 7.3.4. Below is my test
> code. Am I doing something wrong?
>
> TIA, Gene Chow
>
> test=> create or replace function getval() returns varchar as '
> test'> declare val varchar;
> test'> begin
> test'> select into val value from bar limit 1;
> test'> return val;
> test'> end;' language 'plpgsql';
> CREATE FUNCTION
>
> test=> create table public.bar ( value varchar );
> CREATE TABLE
>
> test=> insert into public.bar values ('public value');
> INSERT 4012748 1
>
> test=> create schema foo;
> CREATE SCHEMA
>
> test=> create table foo.bar ( value varchar );
> CREATE TABLE
>
> test=> insert into foo.bar values ('foo value');
> INSERT 4012754 1
>
> test=> set search_path to foo, public;
> SET
>
> test=> select *, getval() from bar;
> value | getval
> -----------+-----------
> foo value | foo value
> (1 row)
>
> test=> set search_path to public;
> SET
>
> test=> select *, getval() from bar;
> value | getval
> --------------+-----------
> public value | foo value
> (1 row)
>
>
> ---------------------------(end of broadcast)---------------------------
> TIP 7: don't forget to increase your free space map settings
>
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
Bruce Momjian <pgman@candle.pha.pa.us> writes:
> This highlights another problem with our plpgsql function caching.
It's a little disturbing to think that any change in SEARCH_PATH might
force us to discard all cached plans. That could be expensive; and
consider a function that deliberately sets SEARCH_PATH to ensure that
it gets the tables it wants. You wouldn't want such a function to be
unable to cache any plans across calls (not to mention blowing away
every other function's plans, too).
We'd probably better record with each plan the SEARCH_PATH it was
generated with. Then, as long as that matches the current setting,
we can re-use the plan.
Of course, none of this is going to happen until someone gets around to
creating infrastructure for flushing cached plans at need. Right at the
moment the answer is going to have to be "don't do that".
regards, tom lane
Eugene Chow wrote: > Thanks. If I had only read the manual before posting. I solved it by > using 'execute' instead of 'select into' since the search_path is not > static in my system. Yep, that's the workaround mentioned in the FAQ. -- Bruce Momjian | http://candle.pha.pa.us pgman@candle.pha.pa.us | (610) 359-1001 + If your life is a hard drive, | 13 Roberts Road + Christ can be your backup. | Newtown Square, Pennsylvania 19073
Tom Lane wrote: > Bruce Momjian <pgman@candle.pha.pa.us> writes: > > This highlights another problem with our plpgsql function caching. > > It's a little disturbing to think that any change in SEARCH_PATH might > force us to discard all cached plans. That could be expensive; and > consider a function that deliberately sets SEARCH_PATH to ensure that > it gets the tables it wants. You wouldn't want such a function to be > unable to cache any plans across calls (not to mention blowing away > every other function's plans, too). > > We'd probably better record with each plan the SEARCH_PATH it was > generated with. Then, as long as that matches the current setting, > we can re-use the plan. > > Of course, none of this is going to happen until someone gets around to > creating infrastructure for flushing cached plans at need. Right at the > moment the answer is going to have to be "don't do that". Yep. I was just surprised it highlighted another failure of cached plans. -- Bruce Momjian | http://candle.pha.pa.us pgman@candle.pha.pa.us | (610) 359-1001 + If your life is a hard drive, | 13 Roberts Road + Christ can be your backup. | Newtown Square, Pennsylvania 19073
"Bruce Momjian" <pgman@candle.pha.pa.us> wrote: > Tom Lane wrote: > > Bruce Momjian <pgman@candle.pha.pa.us> writes: > > > This highlights another problem with our plpgsql function caching. > > > > It's a little disturbing to think that any change in SEARCH_PATH might > > force us to discard all cached plans. That could be expensive; and > > consider a function that deliberately sets SEARCH_PATH to ensure that > > it gets the tables it wants. You wouldn't want such a function to be > > unable to cache any plans across calls (not to mention blowing away > > every other function's plans, too). > > > > We'd probably better record with each plan the SEARCH_PATH it was > > generated with. Then, as long as that matches the current setting, > > we can re-use the plan. > > > > Of course, none of this is going to happen until someone gets around to > > creating infrastructure for flushing cached plans at need. Right at the > > moment the answer is going to have to be "don't do that". > > Yep. I was just surprised it highlighted another failure of cached > plans. There is already a TODO for it ? Regards Gaetano Mendola
Gaetano Mendola wrote:
> "Bruce Momjian" <pgman@candle.pha.pa.us> wrote:
> > Tom Lane wrote:
> > > Bruce Momjian <pgman@candle.pha.pa.us> writes:
> > > > This highlights another problem with our plpgsql function caching.
> > >
> > > It's a little disturbing to think that any change in SEARCH_PATH might
> > > force us to discard all cached plans. That could be expensive; and
> > > consider a function that deliberately sets SEARCH_PATH to ensure that
> > > it gets the tables it wants. You wouldn't want such a function to be
> > > unable to cache any plans across calls (not to mention blowing away
> > > every other function's plans, too).
> > >
> > > We'd probably better record with each plan the SEARCH_PATH it was
> > > generated with. Then, as long as that matches the current setting,
> > > we can re-use the plan.
> > >
> > > Of course, none of this is going to happen until someone gets around to
> > > creating infrastructure for flushing cached plans at need. Right at the
> > > moment the answer is going to have to be "don't do that".
> >
> > Yep. I was just surprised it highlighted another failure of cached
> > plans.
>
> There is already a TODO for it ?
Yep:
o Fix problems with complex temporary table creation/destruction
without using PL/PgSQL EXECUTE, needs cache prevention/invalidation
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
Thanks. If I had only read the manual before posting. I solved it by
using 'execute' instead of 'select into' since the search_path is not
static in my system.
Gene
On Saturday, September 6, 2003, at 04:21 PM, Bruce Momjian wrote:
>
> I think the problem is that the first time the function is called, it
> is
> compiled and cached for later use. At that time the function is bound
> to the table oid, so even though you change the search path, the cached
> copy still calls the old table.
>
> If you exit psql and re-enter, or change the schema _before_ you call
> the function for the first time, it should be fine.
>
> This highlights another problem with our plpgsql function caching.
>
> -----------------------------------------------------------------------
> ----
>
> Eugene Chow wrote:
>> My plpgsql function seems to be ignoring search_path when looking for
>> the right table to select from. I'm running 7.3.4. Below is my test
>> code. Am I doing something wrong?
>>
>> TIA, Gene Chow
>>
>> test=> create or replace function getval() returns varchar as '
>> test'> declare val varchar;
>> test'> begin
>> test'> select into val value from bar limit 1;
>> test'> return val;
>> test'> end;' language 'plpgsql';
>> CREATE FUNCTION
>>
>> test=> create table public.bar ( value varchar );
>> CREATE TABLE
>>
>> test=> insert into public.bar values ('public value');
>> INSERT 4012748 1
>>
>> test=> create schema foo;
>> CREATE SCHEMA
>>
>> test=> create table foo.bar ( value varchar );
>> CREATE TABLE
>>
>> test=> insert into foo.bar values ('foo value');
>> INSERT 4012754 1
>>
>> test=> set search_path to foo, public;
>> SET
>>
>> test=> select *, getval() from bar;
>> value | getval
>> -----------+-----------
>> foo value | foo value
>> (1 row)
>>
>> test=> set search_path to public;
>> SET
>>
>> test=> select *, getval() from bar;
>> value | getval
>> --------------+-----------
>> public value | foo value
>> (1 row)
>>
>>
>> ---------------------------(end of
>> broadcast)---------------------------
>> TIP 7: don't forget to increase your free space map settings
>>
>
> --
> Bruce Momjian | http://candle.pha.pa.us
> pgman@candle.pha.pa.us | (610) 359-1001
> + If your life is a hard drive, | 13 Roberts Road
> + Christ can be your backup. | Newtown Square, Pennsylvania
> 19073
>